REKA, TR80 LCD Pneumatic Cartridge hotmelt system
Item Code: eqt0059
| With the pneumatic hot spray system TR 80 LCD you can apply hot melt adhesives from aluminium cartridges as contactless spray application. The device can also be dot / bead applied by simple retrofitting. The electronic temperature control with LCD display enables precise settings. | |||||||
| Weight applicator | 1400 g | ||||||
| Power connection | 230 V (50 Hz), 2,8 A / 120 V (60 Hz), 3,3 A | ||||||
| Power consumption | 230 V: 650 Watt / 120 V: 400 Watt | ||||||
| Protection class | I, IP 30 | ||||||
| Temperature control, display | Electronic, digital | ||||||
| Temperature limitation | Temperature monitor | ||||||
| Operating temperature | 50 – 210 °C (on request: max. 250 °C) | ||||||
| Temperature constancy | ± 2 °C | ||||||
| Heat-up time | ca. 3 – 10 min. | ||||||
| Gross capacity | 310 ml | ||||||
| Conveyor system | Air pressure | ||||||
| Operating pressure | 0,5 – 6 bar | ||||||
| Length of connections (stand to | 4,5 m | ||||||
| Length of electrical connection | 4 m | ||||||
| Length connection set | 3 m | ||||||
| Stand with pressure regulator + | yes | ||||||
| Recommended melting goods | Hot-melts in 310 ml aluminium cartridges | ||||||
| Brochure | https://www.reka-klebetechnik.de/wp-content/uploads/2017/10/PRO_EN_TR_80_LCD.pdf | ||||||
| Video | https://www.youtube.com/watch?v=31-7XsUJYTM | ||||||
| https://youtu.be/NT4Li9xpwkY | |||||||
| https://youtu.be/MWeuVb7byEE | |||||||
| Nozzles | https://www.reka-klebetechnik.de/wp-content/uploads/2017/10/DUE_TR_80_M10.pdf | ||||||
| https://www.reka-klebetechnik.de/wp-content/uploads/2017/10/DUE_Aufbau_TR_80LCD.pdf | |||||||
| Operations Manual | https://www.reka-klebetechnik.de/wp-content/uploads/2017/10/BED_EN_TR_pneu_2016-03.pdf | ||||||
| Accessories | https://www.reka-klebetechnik.de/wp-content/uploads/2018/07/PRO_EN_Zubeh%C3%B6r.pdf | ||||||
| URL | https://www.reka-klebetechnik.de/en/glue-guns/tr-80-lcd/ | ||||||